Basket for hydraulic cranes with rotation 2 persons load 200 kg
- Rotation 180 ° / 360 °
- Aluminum basket material
- Arm material in iron
- Gravity leveling
- Applicable on crane arms
- The permitted load is 200 kg
- Dimensions: 73 × 140 × 115 cm
- Parapet height 1100 mm
- Plant 1400 × 700 mm
- 2 people
Details and operation:
The basket for hydraulic cranes with rotation has 2 very wide front entrances with the lifting of an easily sliding and light aluminum bar. The two operators can enter and exit simultaneously. The crane basket is bolted to the bent iron arm. The arm is connected to the rotation block. The very solid and fluid block allows the rotation of the basket. It is anchored to a tube with a 4-hole plate welded at the end not included in the product. Then the plate must be connected with a cutout not included in the basket. Each sling is different and it depends exclusively on the type of crane and the number of extensions.
This platform for hydraulic cranes can be installed if you have at least 520 kg of tip capacity. If this is not the case, other strategies must be evaluated or the basket for single operator cranes must be viewed.
The basket for hydraulic cranes with rotation complies with the EN280: 2015 standard by adding to the purchase the leveling kit by soltec which regulates the leveling.
The operator basket was designed by soltec engineers thanks to 25 years of experience. Soltec offers the opportunity to customize the nacelles according to the customer’s needs, always considering compliance with the regulations. Soltec Srl , specialized in the lifting sector for more than 30 years.
All our products are certified and guaranteed. Marca Soltec Srl , specialized in the lifting sector for more than 30 years.
All baskets for hydraulic cranes. Visit www.soltec.org for more information.